← Back to project index

📽️ Projection Mapping Calculator

Result

Options (stacked first, then single; cheapest first)

Suggestion per contrast

How each contrast looks

Simulation: the wall’s ambient light lifts every black to a grey. Real eyes adapt, so the brightest area reads as white. Dark details (blue glow, dark bars) vanish first at low contrast. Real facades add texture and colour tint.

Calibration (home test)

  1. Small projector, plain light wall, room as dark as you like. Note its real ANSI lumens (Eco/Bright mode as used).
  2. Project a full-white image. Measure image width, height and the distance to the wall (m).
  3. phyphox Light: phone flat on the wall, sensor facing the projector. Projector off: read Eamb (room light as it will be).
  4. White image on: read centre + four corners, enter all five.
  5. Black image on: same five points.
  6. Press Apply: η goes into the main calculator. Use Copy to keep the values for later.
\[ \eta=\frac{(\bar E_{white}-\bar E_{black})\,A_i}{\Phi},\quad CR_{room}=\frac{\bar E_{white}}{\bar E_{black}},\quad U=\frac{E_{min}}{\bar E_{white}} \]

The last applied calibration is also remembered in this browser.

Formulas

\[ W_i=\max\!\Big(\tfrac{W}{n_x-(n_x-1)o},\; a\,\tfrac{H}{n_y-(n_y-1)o}\Big),\quad A_i=\tfrac{W_i^2}{a} \] \[ TR=\frac{D}{W_i}\qquad D\in[TR_{min}W_i,\;TR_{max}W_i] \] \[ CR=\frac{E_{amb}+E_{proj}}{E_{amb}}=1+\frac{\eta\,\Phi}{A_i\,E_{amb}}\;\Rightarrow\;\Phi_{req}=\frac{(CR-1)\,E_{amb}\,A_i}{\eta} \] \[ k=\Big\lceil \frac{\Phi_{req}}{\Phi_{proj}}\Big\rceil\ \text{(stacked per tile)},\qquad L_{white}=\frac{\rho\,(E_{amb}+E_{proj})}{\pi} \]

a = projector aspect ratio, o = overlap fraction, Φ in ANSI lumens. Contrast is independent of ρ (Lambertian); ρ only sets absolute brightness L in cd/m².

Out-of-the-box tips

Rent prices: Beamer Budgeting page (EUR incl. 19 % VAT; shown net unless toggled). 1 day = 1-day price. Extra day = the page's 2-day price minus 1-day price ("–" if the page gives no higher 2-day price). Total for N days: 2 days = the page's 2-day price (else 1-day + extra day, else 2 × 1-day); each day beyond 2 = extra day (else 1-day price). Totals × units. est. = a fallback was used (no 2-day price, no extra-day price, or 3+ days with a week tier the linear formula does not model). Aspect ratio from the model name (default 16:9). Lens fit by throw ratio only, lens cost not included. Excludes crew, truss/tower, outdoor housing, transport, media server. Get a quote from a rental house.